Symbol Technologies SPT 1700 Getting Started with the SPT 1700

1-6

SPT 1700 Series Product Reference G uide

Getting Started with the SPT 1700

Before you can use your SPT 1700, perform the basic set up procedures c overed on the

following pages. Specifically:

•Set up the cradle (optional)

•Install and charge the battery

•Start the SPT 1700

•Initiate a Spectrum24 network (SPT 174x only) or wide area network (WAN)

connection (SPT 173X only).

There are optional cable and cradle solutions that enable you to charge the terminal’s

battery and synchronize information on your SPT 1700 terminal with host syste m

applications.

There are several cable and cradle options available for the SPT 1700 :

•Synchronization/Charging Cable

•CRD1700-1000S Single-slot Serial Cradle

•CRD1700-4000S Four-slot Serial Cradle

•CRD1700-1000M Single-slot Modem Cradle

•CRD1700-4000E Four-slot Ethernet Cradle.

This section describes the procedures for connecting ea ch of these cradles to the host PC.

To charge the terminal’s battery using the Synchronization/Charging Cable:

1. Make sure the battery is installed in the terminal. Refer to Installing the Battery on

page 1-13 for instructions.