17-5
Applications: Laser Scanner
Available Symbologies Allows you to select the symbologies to be
recognized by the scanner by tapping on the
box next to the name of the desired
symbology. When selected, the box has a
check mark.
Scan Enable When this option is clicked, and the trigger is
pressed, the laser scanner beam activates.
The beam remains on for approximately 3
seconds. Alternatively, tapping on the Scan
button on the bottom of the screen performs
the same action.
LED When this box is checked, the green LED
lights. This serves as a test of the LED. To
stop the LED test, tap the LED box again.
Trigger Mode Level: only the SPT 1700 scan trigger initiates
the scan; the laser is turned off when the
trigger is released or the decode was
successful.
Pulse: only the SPT 1700 scan trigger initiates
the scan; the laser is turned off when
laser_on_time is reached or when the decode
was successful.
Host (default): The SPT 1700 scan trigger or
the application’s ScanCmdStartDecode
command initiates the scan; the laser is
turned off when the trigger is released, or
when laser_on_time is reached, the
ScanCmdStopDecode command is called, or
the decode was successful.
Bar Type Once a bar code is decoded, displays the type
of the decoded bar codes (i.e., Code 39, Code
128, Code 93, etc.)
Bar Data Once a bar code is decode d, displays the
decoded data.