Synology DS411SLIM manual 199

Synology DiskStation User's Guide

Based on DSM 3.1

To add a VisualStation:

1Click on the Add button.

2The search result will show all the VisualStations within the network. Select the VisualStation that you would like to pair. Make sure the status of the VisualStation is Unlocked.

3Click on Next to continue to Network Settings.

Create a name for the VisualStation.

Define LAN configuration.

4Click on Next to continue to Camera Settings.

Select VisualStation's channel layout. The selected setting will be reflected on the preview area below.

All the cameras added on the Surveillance Station are also listed on this page. Select the camera you would like to show on VisualStation, and drag to the preview area.

5Click on Finish to save the settings.

6Press and hold the Lock button on the VisualStation unit for 3 seconds. The LED light will glow solid green when its status is changed to Locked.

To edit the settings of a VisualStation:

1Select the VisualStation you would like to edit. Double click on it or click on Edit to proceed.

2Edit the corresponding settings.

3Click on Save to finish.

To enable/disable a VisualStation:

1Select the VisualStation you would like to enable/disable.

2Click on the Enable button on the top of the page.

3Select Enable or Disable.

Note: Disabling VisualStation will not delete its settings.

To delete a VisualStation:

1Select the VisualStation you would like to delete.

2Click on the Delete button on the top of the page.

3Click on Yes to finish.

To restore VisualStation to factory default:

1Press and hold the RESET button at the back of the VisualStation until you hear a beep.

2The status of the VisualStation will appear as Reset on the VisualStation list.

To pair the VisualStation with the DiskStation again, you need to delete the entry from the list and add it again. Follow the delete steps and continue with the add process.

199

Chapter 14: Safeguard Your Environment with Surveillance Station