Synology DiskStation User's Guide

Based on DSM 3.1

Enable Terminal Services

Go to Main Menu > Control Panel > Terminal to enable Terminal service, allowing you to use Telnet or SSH to log in to Synology DiskStation and modify its settings.

To enable connection to Synology DiskStation via Telnet or SSH:

1Do any of the following:

If you want to enable the Telnet service, tick Enable Telnet service.

If you want to enable the SSH service, tick Enable SSH service.

Note: When you disable the SSH service, all SSH tasks will be terminated immediately. If you disable the SSH service while performing a backup task, perform the task again after the SSH service is disabled.

2Click OK.

Important: Use the Terminal service with caution. Improper manipulation or modification to Synology DiskStation may result in system malfunction or data loss.

216

Chapter 16: Perform Advanced Management Tasks

Page 216
Image 216
Synology DS411SLIM manual Enable Terminal Services, 216