Synology DiskStation User's Guide

Based on DSM 3.1

Reinstall Synology DiskStation

If you want to reinstall your Synology DiskStation without losing its data, you can use the RESET button on the back panel.

To reinstall Synology DiskStation:

1Press and hold the RESET button for about 4 seconds until the Synology DiskStation emits a beep sound.

2Within the next 10 seconds, press and hold RESET button for about 4 seconds until the Synology DiskStation emits a beep sound.

3Run Synology Assistant and follow the installation instructions in the Quick Installation Guide that came with your installation CD to set up the Synology DiskStation.

Important: The data saved on the Synology DiskStation will not be erased during the reinstallation. However, for security reason, we strongly recommend that you back up the data first.

Enable SNMP Service

Go to Main Menu > Control Panel > SNMP to enable SNMP service, which allows users to monitor Synology DiskStation network flow with the network management software.

Currently, SNMPv1 and SNMPv2c protocols are supported.

To enable SNMP service:

1Tick Enable SNMP service and enter a Community name.

2Enter the optional information to help you identify your Synology DiskStation: Name, Location, and Email.

3Click OK.

To disable the SNMP service:

Uncheck Enable SNMP service, and click OK.

215

Chapter 16: Perform Advanced Management Tasks

Page 215
Image 215
Synology DS411SLIM manual Reinstall Synology DiskStation, Enable Snmp Service, 215