T+A Elektroakustik K1 CD-RECEIVER Vo L A /B, Connecting The System, The System In Use, press

Menu point 4: SETUP - SETUP function 3: SEPARATE VOLUME ADJUSTMENT

press	S E T U P	press	VO L A /B
AMP	OK	AMP	OK
4x		2x

Introduction:

In normal the volume of the speaker output

A and B are controlled in common.

If you connect an additional remote control receiver and a pair of loudspeakers to the speaker connections  B (preferably in a different living room), it is possible to adjust the volume separately for the pairs of spea- kers A und B.

If the system is set to multi-room mode, only the loudspeakers in the room where the user is located are switched on; the other speakers keep quiet.

The volume for  A can only be altered u- sing the  buttons on the machine's front panel, or via the integral remote control receiver.

The volume for B can only be adjusted via an external remote control receiver (see also "multi-room sound system" in the chapter

CONNECTING THE SYSTEM, THE SYSTEM IN USE).

Operation:

To alter the option press the remote control buttons in the sequence shown above. The screen shows the current setting, e.g.

'VOL A/B' separate volume adjustment (multi room sound system)

or

'VOL A+B' common volume adjustment (single room sound system)

You can select the option with the  or

button.

The function is terminated by pressing the

button.

If none of the menu control buttons (, / or ) are pressed for a period of about ten seconds, the unit interrupts the special functions menu and reverts to the standard display. (time-out)

20