T+A Elektroakustik K1 CD-RECEIVER Au X M In, press, Introduction, Aux Min Aux Low Aux Tv Aux Max

Menu point 4: SETUP - SETUP function 4: INPUT SENSITIVITY AUX/TV

S E T U P	press	AU X M IN
AMP	AMP	OK
OK
4x	3x

Introduction:

The sensitivity of the AUX/TV input can be changed to any of four settings so that you can continue to use source devices which are quieter than normal without suffering a disturbing change in volume when you switch from one source to another:

'AUX MIN'

'AUX LOW'

'AUX TV'

'AUX MAX'

The volume corresponds to the setting you choose, i.e. it is quietest at the 'MIN' setting and loudest at the 'MAX' setting.

Note:

To avoid overloading the input sensitivity should be set to 'MIN'.when a high level source is connected to the AUX/TV input.

Operation:

To alter input senstivity of the AUX/TV in- put press the remote control buttons in the sequence shown above.

The screen then shows the current brightness level e.g.:

'AUX MIN'

You can change the current setting by pres- sing the remote control buttons  oder . Any change you make takes effect im- mediately.

If none of the menu control buttons (, /  oder ) are pres- sed for a period of about ten seconds, the unit interrupts the special functions menu and reverts to the standard display. (time-out)

21