Problem: | The tuner works normally, but |
| only picks up a very small |
| number of stations or none at |
| all. |
Cause: | The aerial system or the aerial |
| cable itself is defective. |
Remedy1: | Check the aerial lead for good |
| contact at the aerial wall socket |
| and at the tuner. |
Remedy2: | Check the aerial cable for dam- |
| age and sharp bends (kinks). If |
| necessary, replace it with a new |
| cable. |
Problem: | After a | ||
| continues to show a few of the | ||
| old station names - but those | ||
| stations cannot be picked up. | ||
Cause: | The unit is still storing some | ||
| |||
| reception | frequencies | which |
| cannot be received at the new | ||
| location. |
|
|
Remedy1: | Erase the | ||
| sets individually - see Tuner | ||
| special | functions: | ‘ERASE |
| PRESETS’. |
| |
|
| ||
Remedy2: | Erase all stored presets. | ||
•To do this switch on the unit and hold the button pressed in until a moving message appears on the screen.
•Wait until the moving messa- ge stops, then immediately press the button on the remote control handset and hold it in for about two seconds. The screen will now show the message:
This erases all the stored pre- sets.
55
