RC-IN
Input socket for an E 2000 remote control receiver, available as an optional accessory to suit
MAINS INPUT
The mains cable is plugged into this socket. The system is designed to be used with a standard mains supply: 230 V / 50 – 60 Hz.
•The K1 must not be connected to any other type of power supply.
•Mains leads must be deployed in such a way that there is no danger of damage to them (e.g. through persons treading on them or from furniture).
•If the machine is not to be used for a long period, disconnect it from the mains sup- ply at the wall socket.
Loudspeaker and signal cables
The loudspeaker and signal cables (inter- connects) used in the system do have an im- portant influence on the reproduction quality of the system overall, and this should not be
Our accessory programme includes a range of excellent cables and connectors whose characteristics are matched to those of our loudspeakers and electronic components, and which therefore produce outstandingly har- monious results with them.
For difficult locations and constricted situati- ons you will also find a range of special- length cables and
Mains cables and mains filters
The mains power supply carries the essential energy to your system units, but it also tends to bear interference from remote devices such as radio and computer systems.
In order to prevent
This item often helps to bring a further im- provement to the reproduction quality of our equipment.
For all your questions concerning cabling you will find your specialist dealer competent and comprehensive in his advice, with no obligation to buy. We would also be glad to send you our extensive information material on this subject.
45
