T+A Elektroakustik K1 CD-RECEIVER Controlling The Cd Mechanism, Numeric Track Selection

CONTROLLING THE CD MECHANISM

Selects the previous track during playback.

Starts CD playback, selects the next track during playback.

Fast search backwards to locate a particular passage.

Fast search forward to locate a particular passage.

Note: After about two seconds the search speed rises. At the low search speed you can listen to the music, but at the higher speed the output is muted. During the search proc- ess the current track time is shown on the left of the screen. When the search reaches the start or end of the CD, the CD stops.

Ends playback; the screen shows the message: 'STOP'.

Interrupts playback, i.e. the current track is paused. The screen shows 'PAUSE'. A further brief press on the  button resumes play- back.

Pressing the  button in STOP mode starts PAUSE mode and causes a jump to the first track of the CD resp. the MEMO pro- gram

Selects the playback mode (see Menu control system).

NUMERIC TRACK SELECTION

Direct numeric input for selecting  a track number.

:When you press a numeric button



 (e.g. 1) the screen shows:

'SELECT 1_.

For a period of 3 seconds a marker flashes. During this time you may:

•press a second numeric button to complete a two-digit track num- ber - the machine plays the se- lected track immediately.

•If you do not press a second button and the 3-second period is over, the input assumed as a sin- gle-digit track number - the ma- chine plays the selected track.

Note:

You can also enter a track number directly when the CD drawer is still open. In this case the drawer closes automatically and playback starts with the track you have se- lected.

This button is used to store MEMO programs. If the menu control sys- tem is in use,  acts as the confirmation button (see Menu control system).

35