TANDBERG 770, 990, 880 user manual Web-interface, Text Chat / Closed Captioning

TANDBERG Videoconferencing System General use

Web-interface

It is possible to access and maintain the system remotely via a local area network (LAN) using a standard Web- browser.

Connect your system to a local area network.

Configure your codec:

•Press MENU, select ‘Terminal Settings’, ‘LAN Settings’

•Specify IP-assignment ‘DHCP’ or ‘Static’. If DHCP is selected no other settings are needed. If Static is selected, ‘IP-address’, ‘IP-subnet mask’ and ‘Gateway’ must be specified.

Example:

IP-assignment: Static

IP-address:196.9.200.129

IP-subnet mask: 255.255.255.0

Gateway:196.9.200.21

NOTE

THE SYSTEM MUST BE RESTARTED BEFORE CHANGES IN THE ‘LAN SETTINGS’ MENU CAN TAKE EFFECT.

See ‘LAN Settings’ in ‘Advanced use’ for further information.

•Start your Web-browser. In the address field type the IP-address of the codec. Enter the password and the Web-page of the codec will be shown. The default password is ‘TANDBERG’.

Text Chat / Closed Captioning

While in an ISDN or IP call to another system supporting Text Chat (T.140), select ‘Text Chat’ from the Web-page of the codec. Enter text in the window displayed. When selecting ‘Send Text’, the text will be displayed on the local and far-end monitor as shown below:

The local Text Chat window can be closed manually from the Web-interface by pressing ‘Close Window’. It will also close automatically after a few minutes without activity.

41