TANDBERG 880, 990, 770 Peripherals, TANDBERG Videoconferencing System, Audio Inputs, Audio Outputs

Peripherals TANDBERG Videoconferencing System

5 Video Inputs

•1 video input used by the built-in camera.

•1 video input supporting S-Video through a Mini-DIN connector.

•2 video inputs supporting composite signals through RCA connectors.

•1 VGA input supporting resolutions VGA(640x480), SVGA(800X600) and XGA(1024x768) (auto sensing). The system will automatically adapt to a PAL or NTSC input.

4 Video Outputs

•1 S-Video output, Mini-DIN connector.

•2 composite video outputs, RCA connectors.

•1 VGA output supporting resolutions VGA(640x480), SVGA(800X600) and XGA(1024x768).

The first Mini-DIN connector and the first RCA connector provide main video (incoming/outgoing video and menus). The other connector provide selfview/still image/Duo Video. The outputs are always active.

The format of the output will be either PAL or NTSC depending on your country’s standard video format.

4 Audio Inputs

•2 microphone inputs (balanced, 11V phantom powered) via XLR connectors.

•2 audio inputs (line level) via RCA connectors.

All audio inputs are active by default. For further information, refer to section ‘Audio Settings’.

2 Audio Outputs

•1 output (line level) via RCA connector providing audio from far end in addition to dial tones. This output is used by the monitor.

•1 VCR output (line level) via RCA connector providing a mixed signal between audio from the local side (except from the VCR input) and audio from the far end. This output is intended for connection to a VCR.

94