TANDBERG 880, 990, 770 VGA Settings, Icif Will Not Be Available When Vga Out Is Main Or Dual

Advanced use TANDBERG Videoconferencing System

VGA Settings

NOTE

IF YOU SET ‘VGA OUT’ TO ‘MAIN’, MAKE SURE YOU HAVE A VGA-MONITOR CONNECTED TO THE VGA-OUTPUT ON THE SYSTEM.

NOTE

ICIF WILL NOT BE AVAILABLE WHEN VGA OUT IS MAIN OR DUAL.

VGA Out

To enhance the local video quality, a VGA monitor may be connected.

Main: Should be used if you want to use a VGA monitor as your main monitor. Video outputs 1 and 2 will be disabled.

Dual: Should be used if you want to use a VGA monitor as your dual monitor. Video output 3 will be disabled.

Off: Should be used if you want to use a TV monitor as your main monitor.

VGA Out Quality

VGA Out Quality changes the resolution of the VGA signal available on the ‘VGA Out’ connector at the rear of the codec.

Auto: Will sense the resolution on the ‘VGA input’ port and use the same resolution on the ‘VGA Out’ port.

VGA: Will force ‘VGA out’ to VGA(640X480).

SVGA: Will force ‘VGA out’ to SVGA(800X600).

XGA: Will force ‘VGA out’ to XGA(1024X768).

64