TANDBERG D1320202 manual Connecting to the Data port Command Interface using Telnet

TANDBERG GW Data port Command Interface User Guide

3.Connecting to the Data port Command Interface using Telnet

The TANDBERG 3GW has one LAN port.

The GW’s Telnet server provides access to the Data port Command Interface through a 10/100 base T network interface supporting the TCP/IP protocol.

When connected to the 3G Gateway, type tsh to start a t-shell from the command line. The Telnet client will receive a welcome message similar to the following:

Welcome to TANDBERG

TANDBERG 3G Gateway Release R2.0 customer

SW Release Date: 2006-03-28

NOTE! If the TANDBERG 3GW is protected by an IP password you will be prompted to enter this password before you can access the Data port Command Interface via Telnet.

6