TANDBERG GWData port Command Interface User Guide
4.2.3. System Status Commands
Command: | Description: |
SystemUnit | Displays information regarding the physical system |
| SystemUnit |
| Status format: |
| <ProductType> |
| <Uptime> |
| <Software |
| Version> |
| Name> |
| ReleaseDate> |
| Configuration |
| Telephony:> |
| VideoTelephony:> |
| <Hardware : |
| Version> |
| SerialNumber> |
| MainBoard> |
| AdditionalBoard> |
| Configuration: |
| PRI> |
| TemperatureCelcius> |
| TemperatureFahrenheit> |
|
Parameters:
•ProductType, the name of the product, e.g. 3G Gateway
•Uptime, the time the system is running since the last reboot in seconds
•Software
oVersion, the unique name of the software
oName,
oReleaseDate, the time and date of the build of this software
oConfiguration
•Telephony, the amount of supported voice channels
•VideoTelephony, the amount of supported video channels
•Hardware
oVersion, software ID
oSerialNumber, software serial number o MainBoard, the ID of the main board
o AdditionalBoard, indicates extra boards in the box o Configuration:
•PRI, the amount of PRIs in the target system
•BRI, the amount of BRIs in the target system
•TemperatureCelcius, temperature of the main board in Celcius
•TemperatureFahrenheit, temperature of the main board in Fahrenheit
Example of SystemUnit feedback: *s SystemUnit:
ProductType: "TANDBERG 3G Gateway"
Uptime: 15123
Software:
Version: "R2.0Beta8 (TEST SW)"
Name: "test"
ReleaseDate:
Configuration:
21