TANDBERG GWData port Command Interface User Guide
4.2.1. System Configuration Commands
Command: | Description: |
H323Gatekeeper | Sets gatekeeper parameters. |
| NOTE! H.323 services must be set before the GW can be registered to a |
| gatekeeper. |
|
| H323Gatekeeper Address <IPAddr> |
|
|
| or |
|
|
| H323Gatekeeper Authentication Mode <Auto/off> |
|
|
| or |
|
|
| H323Gatekeeper Authentication ID: <S: 0, 50> |
|
|
| Or |
|
|
| H323Gatekeeper Authentication Password: <S: 0, 50> |
|
|
|
| |
|
|
| |
|
| • Authentication Mode configures the use of authentication |
|
|
| against a gatekeeper. |
|
|
| • Authentication ID Configures the user name used within an |
|
|
| authentication challenge |
|
|
| • Authentication Password sets the password used within the |
|
|
| authentication process. |
|
|
| NOTE! Authentication Password is write only. |
|
|
| Example of H323Gatekeeper feedback: |
|
|
| Xconf H323Gatekeeper Authentication |
|
|
| *c xConfiguration H323Gatekeeper Authentication Mode: Off |
|
|
| *c xConfiguration H323Gatekeeper Authentication ID: "" |
|
| H323CallSetup | Configures for direct or via gatekeeper calling |
|
|
| H323CallSetup Mode: <Direct/Gatekeeper> |
|
|
|
| |
|
| Example of H323CallSetup feedback: |
|
|
| *c xConfiguration H323CallSetup Mode: Direct |
|
|
|
|
|
| IP | Configures the LAN interfaces when static IP address allocation is used. |
|
|
| NOTE! The GW needs to reboot before the changes will take effect. |
|
|
| IP Assignment: <DHCP/Static> |
|
|
| or |
|
|
| IP Address <IPAddr> |
|
|
| or |
|
|
| IP Address Subnetmask <Subnetmask> |
|
|
| or |
|
|
| IP Address Gateway <IPAddr> |
|
|
| or |
|
|
| IP Address DNS Server [1..5] Address <IPAddr> |
|
|
| or |
|
|
| IP Address DNS Domain Name <S: 0, 64> |
|
|
|
| |
|
| parameters: |
|
|
|
|
|
|
| 9 |
|
