TANDBERG GWData port Command Interface User Guide
|
| • DNS Server: Number identifying one of 5 DNS servers which |
|
|
| can be configured. If this parameter is omitted the command |
|
|
| applies to the first configuration (1). |
|
|
|
| |
|
| • Assignment: Selects between DHCP (Dynamic Host |
|
|
| Configuration Protocol) or static IP address allocation. When |
|
|
| DHCP is selected the GW will automatically receive all the |
|
|
| necessary information from the DHCP server. This function |
|
|
| should be used when the GW is connected to a LAN using |
|
|
| DHCP. When using this mode, |
|
|
| are not used because the DHCP server supplies these parameters. |
|
|
| • Address: Sets the static IP address for the given LAN interface. |
|
|
| • Subnetmask: Sets the subnet mask variable. Subnet mask |
|
|
| defines the network class. If the setting is 255.255.255.0 the local |
|
|
| network will support up to 256 nodes, denoting a class C |
|
|
| network. If the setting is 255.255.0.0 the local network is a class |
|
|
| B network with 65536 addressable nodes. |
|
|
| • Gateway: Sets the gateway IP address. If a gateway is located on |
|
|
| the LAN and the GW needs to reach nodes through this gateway, |
|
|
| the gateway address can be set using the gateway variable (the IP |
|
|
| address of the gateway will be set automatically if the GW is in |
|
|
| DHCP mode) |
|
|
| • Domain Name: Sets the domain name string of which the |
|
|
| gateway is part of. Minimum 0, maximum 64 characters. |
|
|
| Example of IP Address feedback: |
|
|
| *c xConfiguration IP Address: "127.0.0.1" |
|
|
|
|
|
| Ethernet | Sets LAN port speed. |
|
|
| NOTE! The GW needs to reboot before the changes will apply. |
|
|
| Ethernet <speed> |
|
|
|
| |
|
| parameters: |
|
|
| • speed: auto/10half/10full/100half/100full. The speed is either |
|
|
| set to auto or manually from 10mb half duplex to 100mb full |
|
|
| duplex. When set to auto the GW will automatically negotiate |
|
|
| with the network and use the best available setting. |
|
|
| Example of Ethernet feedback: |
|
|
| *c xConfiguration Ethernet Speed: Auto |
|
|
|
|
|
| ISDN | Defines various ISDN protocol settings. |
|
|
| ISDN IncomingBearerCapability: <UDI/All> |
|
|
| or |
|
|
| ISDN OutgoingBearerCapability: <H324m/UDI> |
|
|
| or |
|
|
| ISDN BRI SwitchType: <NI/ATT/Euro/Japan> |
|
|
| or |
|
|
| ISDN PRI SwitchType: <NI/ATT/Euro/Japan> |
|
|
| or |
|
|
| ISDN PRI Interface LowChannel: <1..31> |
|
|
|
| |
|
| Parameters: |
|
|
|
| |
|
|
|
|
|
| 10 |
|
