Basic H.323 Services Setup
TANDBERG CONTENT SERVER ADMINISTRATOR GUIDE
About Basic H.323 Services
A quick basic setup of your TANDBERG Content Server includes:
1.Setting up H.323 services via the Content Server interface.
2.Making a test call recording.
3.Changing the administrator password and setting up server date and time on the Windows Server.
Make sure that the E.164 aliases and H.323
IDs unique on your network are valid for
your gatekeeper or border controller.
By default, the Content Server’s H.323 ID is set to the machine name, eg.
alive Recording Alias is set to Live<machine_ name> and the H.323 ID of an on demand Recording Alias is set to OnDemand<machine_ name>. If upgrading from S2, the machine name will be replaced by the serial number.
| You can register the Content Server with |
| either gatekeeper or border controller. |
| For simplicity in this document we’ll use |
| gatekeeper to refer to either device. |
|
|
! | The default local administrator account |
should be used for administrative | |
functions such as system upgrades |
and updates and when using Remote Desktop access to the Content Server. It is therefore very important to change your password as described in the Windows Server Setup section.
For more on setting the administrative
properties and user configuration, see
the Administrator Settings section.
Start a Web browser and enter the IP address of the Content Server. You can use either http or https, with https recommended for administrative access.
Go to the Administrator Settings > Site Settings to set the System Name for the Content Server.
Note: The System Name is used by TMS to identify the Content Server.
Step 1 - Initial Setup
When prompted for login, enter the username administrator and password TANDBERG
If required, set Gatekeeper registration to Enabled and set the Gatekeeper IP address. You can choose to register the Content Server as a Terminal
or a Gateway. If you select Gateway registration, you will need to enter H.323 and E.164 Gateway prefixes.
Go to Conference Setup > Recording Alias Options. Edit the E.164 aliases and H323 IDs for the default Recording Aliases and save.
Save the Site Settings. You may refresh the browser page to check if gatekeeper registration has been successful.
Table of |
| Introduction |
| Installation | Quick Setup | TCS |
| Backing up and |
| Administrator |
| Conference |
| View |
| Appendices |
Contents |
|
| Administration |
| Restoring |
| Settings |
| Setup |
| Conferences |
| ||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D13898.06 |
|
|
|
|
|
| 18 |
|
|
|
|
|
| |||
MAY 2008 |
|
|
|
|
|
|
|
|
|
|
|
| ||||
