7 - Advanced operations
Changing the palyback speed without changing the key (Key Original)
When the Key Original function is ON, you can change |
|
|
|
| |
the playback speed without changing the key. | When the Key Original function is ON, you may find that | |
Turn the Key Original function on and off on the menu | the audio has artifacts not present when just Pitch is | |
(menu number 01 | used. This is an expected result of the Key Original pro- | |
key on the remote control turns this function on and off. | cessing, it does not indicate a problem with the unit. | |
Use the PITCH knob on the front panel when SHIFT |
|
|
indicator is unlit, or use the PITCH and PITCH +/- keys |
|
|
to change the playback speed without affecting the key. |
|
|
Program playback
This function enables playback of selected tracks in any desired order. Up to 100 tracks can be selected from a CD for Program playbacK.
1 During stop mode, press the PGM key on the remote control.
Track No. | Program No. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Or enter the program menu (menu number 4 ProG) then press the PITCH knob.
2 Use the number keys or SKIP keys on the remote control, or SKIP keys on the front panel to select each desired track for program playback.
3 Press the SEARCH ˚ key. The track number will be entered into the program.
Or turning the PITCH knob right enters the selected track number into the program.
4 Repeat the above step 2 and 3 until the desired program is completed.
5 When program is completed, press the PITCH knob on the front panel or PGM key on the remote control.
Even when the power is turned off, program is main-
tained.
When the disc is ejected, the program lists are erased.
Editing a programmed track
1 Enter the program mode.
2 Use the SEARCH keys to select the track for editing. Also using the PITCH knob on the front panel to select the track for editing.
The track number will be shown in the display.
3 Use the number keys or SKIP keys on the remote control or SKIP keys on the front panel to edit the programmed track.
4 When editing is completed, press the PITCH knob on the front panel or PGM key on the remote control.
Adding a track to the program
1 Enter the program mode.
2 Use the SEARCH keys on the front panel or remote control, or using the PITCH knob on the front panel to select the programmed track before the portion you wish to add a track.
The track number should be shown in the display.
3 Pressing the DISPLAY key and SEARCH ˚ key simultaneously on the front panel or pressing the A.RDY/INS key adds the program step.
4 Use the number keys or SKIP keys on the remote control or SKIP keys on the front panel to input the track number of the track to be added.
5 Press the PITCH knob on the front panel or PGM key on the remote control to exit the program mode.
TASCAM
