Tascam CD-01UPro, CD-01 U owner manual Rack-mounting the unit, Handling of compact discs

1 - Introduction ΠEnvironmental considerations

Rack-mounting the unit

Use the rack-mounting kit to mount the unit in a

standard 19-inch equipment rack, as shown below.

Remove the feet of the unit before mounting.

If you are mounting the unit in a rack, leave 1U of

space above it and 10cm (4 in) or more of space at

the rear. The CD-01U/CD-01U Pro can be mounted

in any angle between 0 to 90 degrees.

SeeEnvironmental considerationson the previous page.

Handling of compact discs

The CD-01U/CD-01U Pro have been designed for the

playback of CD-DA format discs and MP3 files record-

ed in ISO9660 format. In addition to ordinary 5-inch and

3-inch CDs, it can also play properly recorded CD-R

and CD-RW discs.

When removing a CD from its case, press down on the

center of the disc holder to free the CD, then lift the disc

out, holding it carefully by the edges.

≠Removing a disc

≠Hold the CD like this

≠Avoid getting fingerprints on the signal side (opposite the label side). When cleaning, wipe gently with a soft cloth from the center towards the outside edge. Dust and grime may cause skipping, so keep discs clean and store them in their cases when not being played.

≠Do not use any record spray, anti-static solutions, benzene, paint thinner or other chemical agents to clean CDs as they could damage the delicate playing surface.

≠Discs should be returned to their cases after use to avoid serious scratches that could cause the laser pickup to skip.

≠Keep discs away from direct sunlight, and places of high heat and humidity. If left in such places, warping could result.

≠Do not affix any labels or stickers to the label side of the disc. Do not write on the disc with a ballpoint pen.

≠Please do not insert discs that have adhesive remain- ing from tape or stickers that have been removed. If they are inserted into the player, they could stick to the internal mechanism, requiring removal by a tech- nician.

≠Only use circular compact discs. Avoid using non-cir cular promotional, etc. discs.

≠The CD-01U/CD-01U Pro cannot play unfinalized CD-R/RW discs.

≠Do not use a C-thru disc.

The unit does not support a C-thru disc. Therefore, you may not be able to insert a C-thru disc or may not be able to remove a C-thru disc that has been successfully inserted to the unit.

In the latter case, try to press the DISPLAY and EJECT keys simultaneously, which may solve the problem.

≠Do not use the DualDisc. DualDisc is two-sided play- back only discs. Insertion or ejection of a DualDisc into/from CD-01U/CD-01U Pro is likely to cause scratches to the surface of the DualDisc. Scratched discs may not play in CD products.

A DualDisc may not play in CD-01U/CD-01U Pro and a DualDisc could get stuck in and may not be able to be removed from the CD-01U/CD-01U Pro.

TASCAM CD-01U/CD-01UPro 7