2 – Quick Start Guides

or insert the card. If you remove or insert the SD card when the unit’s power is on, the unit cannot shut down properly and all unsaved data and settings will be lost. These data and settings cannot be recovered.

Do not remove the batteries or disconnect the power cable while the unit power is ON.

The included alkaline batteries are for confirming operation of the unit and might not last very long.

Before turning the power ON, completely turn down the volume of headphones and monitoring systems connected to the unit.

TIP

This unit can also be powered by a PS-P520 power adaptor (sold separately) (see “Connecting an AC adaptor (sold separately)” on page 32).

You can monitor recordings using speakers by connecting an amplifier or powered speakers to the LINE OUT jacks.

Playing and mixing the demo song

Before the unit is shipped, a demo song is stored on its SD card. We are now going to use basic playback and mixing features with this demo song.

1Press the HOME key to open the Home

Screen.

2When the Home Screen is open, press the MENU key to open the MENUscreen.

3Use the DATA wheel to select the SONG menu, and press the F4 (¥) key to open the SONGmenu screen.

4Rotate the DATA wheel to select LOAD, and press the F4 (¥) key to open the SONG LOAD screen that shows a list of songs.

TASCAM DP-008 11