
Preparing the power and SD card
Installing an SD card
1Make sure the unit power is OFF. Open the SD card slot on the right side of the unit.
2Insert the SD Card into the slot as shown in the following illustration until it clicks into place.
3 Close the cover.
Ejecting the card
Push an inserted card in further to eject it.
CAUTION
Always turn the power OFF before removing the batteries or the SD card. Removing either while the power is still ON will cause any recordings and settings made since the last time the power was turned OFF or the song was saved to be lost. These data and settings cannot be recovered.
4 – Preparations
Write-protected cards
SD cards have
Unprotected Protected
When the protect switch is in the LOCK position, files cannot be recorded or edited on the card. Slide the switch away from the LOCK position if you want to record, erase or otherwise changed files on a card.
Preparing the power
This unit can be powered either by AA batteries or a
Installing batteries
Open the battery compartment on the bottom of the unit. Insert 4 AA batteries in the box according to the + and - indications.
CAUTION
•The unit does not have charging ability. To use NiMH batteries, use an optional charger.
•The included alkaline batteries are for confirming the operation of the unit and might not last very long.
TASCAM