2 – Quick Start Guides

OL indicator

NOTE

When you play the guitar, the input level is shown by the A(INPUT A) and 1(TRACK 1) meters on the display.

Turn up the TRACK 1 LEVEL and MASTER LEVEL knobs and the VOLUME dial to hear the guitar sound through headphones. When doing so, the Land Rmeters on the right side of the display become active.

You can use the TRACK 1 PAN knob to adjust the stereo position of the signal when monitoring.

The input signal cannot be monitored if the REC indicator of the TRACK 1 that it is assigned to is not lit.

Recording guitar to TRACK 1

1Press the playback (Á) key while pressing and holding the record () key to start recording. The TRACK 1 REC key stops blinking and stays lit constantly.

TRACK 1 REC indicator

You are recording. Play your guitar!

2When you are finished, press the stop (ª) key to stop recording.

3Press the TRACK 1 REC key again. Its light turns off.

Listening to your recording

1To go to the beginning of the song, press the Ô key while pressing and holding the stop (ª) key. (This is the Return To Zero (RTZ) function)

2Press the playback (Á) key to play the recorded track.

3Use the TRACK 1 LEVEL knob and the MASTER LEVEL knob to adjust the playback level. Use the VOLUME dial to adjust the final monitoring volume.

16 TASCAM DP-008