Tascam DP-008 Rear panel

3 – Names and Functions of Parts

Rear panel

zFOOT SWITCH jack

You can use a foot switch to punch in and out (start and stop recording).

xINPUT B jack (1/4” phone jack)

Use this as the input source by setting INPUT B to external input (“Ext. Input”) on the INPUT SETTINGscreen. You can use this jack for a line level or mic level signal (unbalanced connection).

cINPUT A jack (1/4” phone jack)

Use this as the input source by setting INPUT A to Ext. Input(external input) on the INPUT SETTINGscreen. You can use this jack for a guitar/line level or mic level signal (unbalanced connection).

Set the MIC/LINE–GUITAR switch according to the input source.

vMIC/LINE-GUITAR switch

Set this switch to match the input signal to the INPUT A jack on the rear panel. For mic or line signals, set it to MIC/LINE.

For electric guitars and basses that are connected directly, set it to GUITAR.

bINPUT A/INPUT B jacks (XLR jacks)

Condenser microphones that require phantom power can receive it when they are connected to these jacks. (See “Phantom Power” on page 41.)

(Pin assignments—1: ground, 2: hot, 3: cold)

If devices are connected to both the XLR and the 1/4” phone jacks, the 1/4” phone jack is given precedence (the XLR connection is disabled).

nLINE OUT jacks

Use these to connect a monitoring system (powered speakers or an amplifier with speakers).

mPHONES jack

Connect headphones (with a stereo mini- plug connector) to this jack.

,VOLUME dial

Use this to adjust the volume output from the PHONES connector.

TASCAM DP-008 27

Contents

OWNER'S MANUAL WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Page CAUTIONS ABOUT BATTERIES Page 11 – Exchanging Data with a Diagram Overview of this unit About this manual Manual conventions Product parts Intellectual property rights About SD cards Precautions for use Cautions on installation Beware of condensation Cleaning the unit Playback and mixing Preparing to listen to the demo song Playing and mixing the demo song Page From recording to creating a master track Creating a new song Connecting and setting the input sources Adjusting the input level and monitoring Recording guitar to TRACK Listening to your recording Record guitar to TRACK Record vocals on TRACK Page Mixing the tracks Mastering the mix Page Page Shutting down the unit Top panel Page Front panel Rear panel Right side panel Bottom panel Home Screen Preparing the power and SD card Installing an SD card Preparing the power Connecting an AC adaptor (sold separately) Start-up& shutdown Starting up the unit Shutting down Formatting SD cards Recorder modes Connecting with other equipment Rear panel connections Right side panel connections Adjusting the contrast Setting the backlight Partitions and songs Selecting the active partition Editing names Loading a saved song Creating a new song Viewing song information Saving a song Copying songs Erasing songs Protecting songs Selecting the input source Phantom power Monitoring input signals About the OL indicators and level meters Using input EQ Assigning inputs Making the first recording Making additional recordings Mixdown Multitrack recording REC indicator settings Track pan and level settings Input selection and assignment Reverb Muting tracks Mastering Setting the end point Recording the master track Undoing operations (undo) Undoing the last operation (single undo) Undoing a previous operation (multi-undo) Erasing the operation history Punching in and out Using the foot switch to punch in/out Setting the foot switch polarity Bouncing tracks Using the bounce function Confirming the result Locate and search functions Direct locate function Fast forward/rewind search Repeat playback Setting IN and OUT points Editing IN/OUT points Using repeat playback Locating to the IN or OUT point Automatically punching in and out Setting the interval between repetitions Rehearsal Using auto punch in/out to record Overview of track editing Editing points Basic editing procedures Explanation of items COPY/PASTE COPY/INSERT MOVE/PASTE MOVE/INSERT OPEN (insert silence) CUT (remove part) SILENCE (part erase) CLEAN out (track erase) Metronome Tuner Chromatic tuner mode Oscillator mode Turning the power off automatically Viewing information Page Overview of partitions Reformatting MTR partitions Reformatting the FAT partition Initializing SD cards Supported operating systems Connecting with a computer Disconnecting Song backup and restoration Backing-upsongs Restoring songs Track import and export Importing tracks Exporting tracks Exporting a stereo master track Why can’t I hear any sound when I play back Why does the sound I'm recording sound distorted Why can’t I record Why can’t my computer “see” the unit files Page Page Audio input/output ratings Audio performance General Optional accessories Computer requirements Backup memory Dimensions Block diagram