REVERBSETTING

6 – Basic Recording

Set the track EQ using the EQ SETTINGscreen.

1Press the EQ key to open the EQ SETTING screen.

2Set the track EQ (equalizer).

The track equalizer has the following parameters.

Parameter

Setting value

EQ-SWITCH(track EQ

ON/OFF

switch)

(Default: OFF)

Hi-F(high frequency

1.7 kHz – 18 kHz

range)

(Default: 5 kHz)

Hi-G(high range

±12 dB

gain)

(Default: 0.0 dB)

Lo-F(low frequency

32 Hz – 1.6 kHz

range)

(Default: 350 Hz)

Lo-G(low range

±12 dB

gain)

(Default: 0.0 dB)

Use the F1 (˙) and F2 (¥) keys to switch tracks.

Use the F3 (§) and F4 () keys to select parameters.

Use the DATA wheel to adjust the parameters.

3After making the track EQ settings, press the HOME key to return to the

Home Screen.

NOTE

When track EQ is ON for a track, the track is shown on the Home Screen as in the illustration below.

Track EQ is ON

Reverb

This unit has six types of reverb effects.

Adjust the level of the signal sent to the reverb effect from each track by using their REVERB knobs.

The signals are sent to the reverb effect after track EQ (equalizer) is applied.

1 Press the REVERB key to open the screen.

2Adjust the reverb settings for the following parameters.

Parameter

Setting value

TYPE

Hall 1/Hall 2/Room/

 

Studio/Plate 1/Plate 2

 

(Default: Hall 1)

46 TASCAM DP-008