
8 – Editing Tracks
•• OPEN TRK (1to 8, 1/2, 3/4, 5/6, 7/8,
•• IN/OUT
CUT (remove part)
IN OUT
IN
This function cuts (deletes) the audio data between the IN and OUT points on the selected track, and shifts the remaining recording after the OUT point forward to the IN point. Therefore, the track becomes shorter.
The following parameters are used in this operation.
•• CUT TRK (1to 8, 1/2, 3/4, 5/6, 7/8,
•• IN/OUT
SILENCE (part erase)
IN OUT
IN OUT
This function cuts (deletes) the audio data between the IN and OUT points on the selected track, leaving silence between the IN and OUT points, as though there had been no recording.
This operation does not change the length of the track.
The following parameters are used in this operation.
•• SILENCE TRK (1to 8, 1/2, 3/4, 5/6, 7/8,
•• IN/OUT
TIP
Using this function, you can delete short noises, for example.
CLONE track (track duplication)Use this function to duplicate a single track, a track pair or the master track on a different track or track pair. Each track is copied entirely, so the IN/OUT/TO points have no effect.
The following parameters are used in this operation.
•• SOURCE TRK (1to 8, 1/2, 3/4, 5/6, 7/8, MST)
62 TASCAM