7 – Recorder Functions
|
| TIP | |
TIP | |||
|
| ||
|
|
|
RTZ and LRP below the Ô and keys are abbreviations for Return To Zero and Last Recording Position, respectively.
You can also use the F3 and F4 keys to capture IN and OUT points when the Home Screen is open.
Fast forward/rewind search
Press the Ô or key when stopped or during playback to rewind or fast forward, respectively.
Each time you press one of these keys, the speed increases from 10x to 50x, 100x and 1000x.
Repeat playback
Use the repeat playback function to play the same part again and again.
The repeated passage is time between the IN and OUT points.
Setting IN and OUT points
In addition to using them for setting the repeat playback passage, the IN and OUT points are also used for interval setting for track editing. Moreover, the OUT point is used as the end point of the master track when mastering.
Capturing IN and OUT points
IN and OUT points can be captured when stopped, during playback or while recording.
1 Press the IN/OUT key to open the I/O SETTINGscreen.
2Press the F3 (IN) key or F4 (OUT) key at desired position (regardless of whether the unit is stopped, playing or recording). “SET IN !” or “SET OUT !” and the captured time appear.
[SET IN]
[SET OUT]
Editing IN/OUT points
1When the I/O SETTINGscreen is open (see the first screen figure in the previous section), press the F2 (EDIT) key to open the edit screen.
2Edit the values of IN and OUT points using the following guidelines.
•• Use the F3 (§) and F4 (¶) keys to move the cursor between the IN and OUT points.
•• Use the Ô/ keys to move the cursor between time fields.
•• Turn the DATA wheel to change the value at the cursor position.
3When finished editing, press the HOME key to return to the Home Screen.
NOTE
In the following cases, IN and OUT points cannot be captured or edited.
TASCAM