Tascam HS-8 Editing the project name, NEXT, OTHERS, Touch the, BS button, DEL button, Project Name, Date button:, Character buttons

CREATEPROJECT

FakeRate

FolderName

CREATE PROJECT screen 1

You can make the following settings on this screen.

Project Name: Touch the ProjectName button to open the screen where you can edit the project name.

The maximum number of characters for project and folder names is 31. Extra characters are discarded.

Folder Name: Touch thebutton to open a screen where you can change the name of the first folder.

NOTE

On the 1st FOLDER screens, the maximum number of characters allowed is indicated by the yellow background.

Fs: Set that sampling frequency of the project.

48k-0.1% sampling frequency is pull-down compatible, and 48k+0.1% is pull-up compatible.

BWF Chunk Fs: Set the sampling frequency for BWF chunks. To use the actual sampling frequency of the recordings, select ActualRate. For pull-up/

pull-down, select to write 48k instead of 48k±0.1%.

NEXT: Open the next page.

CREATE PROJECT screen 2

You can make the following settings on this screen. Frame Type: Set the time code frame type.

OTHERS: Use the CurrentSettings of other parameters to create a project or select Factory Preset to use the default settings.

3 After you complete making the settings, touch the button.

NOTE

If a project with the same project name already exists, the CREATE PROJECT button appears gray and you will not be able to create a new project. If this happens change the project name.

5 – Projects

4Touch the OKbutton when the confirmation pop-up message appears.

When creation of the project completes, the Home Screen reopens.

NOTE

••	Immediately after creation, the new project becomes the
	current (loaded) project.
••	The letter “C” appears on the icon to the left of the name of the
	current project on the PROJECT screen.

Editing the project name

1Touch the ProjectNamebutton on the CREATE PROJECTscreen to open the PROJECTNAMEscreen as shown below.

Date button: Touch this button to change the project name to the date currently set for the unit in a “yyyy-mm-dd” format.

NOTE

••	If the same project name or folder name already exists, an
	underscore (“_”) followed by a number that has not been used is
	added.
••	After pressing the “Date” button to change the name to the
	date, you can further edit the name on this screen.

Project name display area: The input project name is shown. The maximum number of characters allowed is indicated by the yellow background.

Character buttons: Use these to input the project name.

BS button: Use this to erase the character to the left of the cursor.

DEL button: Use this to erase the character to the right of the cursor.

Shift button: Touch this to switch between numerals and symbols and uppercase and lowercase Roman letters.

TASCAM HS-8 35