In this chapter, we explain the unit’s internal settings in detail.
Menu screen
Press the MENU key on the front panel to open the following MENU screen.
•REC SETUP button
Make recording settings.
•PLAY SETUP button
Make playback settings.
•SYNC T/C button
Make synchronization and time code settings.
• REMOTE SETUP button
Make settings for external remote control.
•MIXER SETUP button
Make mixer settings.
•CHANNEL SETUP button
Make settings for each channel.
•METER SETUP button
Make level meter settings.
•SYSTEM SETUP button
Make system settings.
•CF MANAGE button
Manage CF cards.
•VERSION INFO button
Show the system version.
Recording settings (REC SETUP)
The RECSETUP screen has three tabbed pages: REC TRACKS, FILEFORMAT and OPTIONS. Touch the tabs at the bottom of the screen to open the corresponding page.
REC TRACKS page
Touch the record arm buttons below the level meters to arm the tracks that are to be recorded and disarm the tracks that are not to be recorded.
6 – Internal Settings
When a track is armed for recording, the button background appears red. (Default setting: no tracks
FILE FORMAT page
Use this to make file format settings.
File Mode
Set the mode for recording files.
MONO (default value): Each track is handled as a monophonic file.
POLY: Multiple tracks are handled as a single combined file.
Mono File Place
When the “File Mode” is set to “MONO”, set the folder where audio files are saved with the following buttons.
SubFolder button (default value): Audio files are saved in
subfolders created for each take within the folder.
Folder button: Audio files are saved directly in the folder.
NOTE
•• | In both modes, a subfolder is created for each take inside the |
| folder, and management files are generated in these subfolders. |
•• | When Folder mode is selected, the maximum number of takes |
| that can be recorded in a single folder is greatly reduced from |
| normal. For this reason, when switching to Folder mode the |
| following |
| reduced maximum limit to the number of takes. |
TASCAM