6 – Internal Settings and Operations
Reference level line display ON
NOTE
If you press the EXIT/CANCEL (PEAK CLEAR) key when the Home Screen is open, the peak hold display resets.
System settings (SYSTEM SETUP)
Make system settings on this screen.
The SYSTEMSETUP screen has 2 pages: PREFERENCES and CLOCKADJUST. Touch the tabs at the bottom of the screen to open the corresponding page.
PREFERENCES page
Set system preferences on this page.
KBD Type
Set the connected keyboard type to either US (default setting) for English keyboards or JPN for Japanese keyboards.
Solo Mode
Set the solo mode.
Set to “Single” (default setting) to solo one track at a time or “Mix” to allow more than one track to be soloed at the same time.
Online Function
Set whether or not to use the online function. Set to “Enable” to allow on line playback to be used from the parallel connector, serial connector
Ref. Level
Set the reference level for analog input and output to a number of decibels below the maximum level (full scale utilization).
Setting buttons:
CLOCK ADJUST page
Set the time of the
Touch the item that you want to set, and use the DATA dial to adjust the item. (See “Setting the time of the
NOTE
While setting the time, the clock stops and the “:” does not blink. When you touch the SET button, the clock starts again and the “:” blinks.
Managing CF cards (CF MANAGE)
Use this screen to manage CF cards.
CURRENT MEDIA
This shows the currently selected card slot name and its stauts.
CF SELECT
Touch this to open the CFSELECT screen where you can choose the CF card for recording and playback.
FORMAT
Format the CF card.
QUICK: | This only formats file management information. |
FULL: | This formats the entire disc. |
52 TASCAM