7 – Mark and Locate Functions
Manual locate function
You can directly input a time and locate to it. Touch the Manual Locate button on the Home Screen to open the MANUALLOCATE screen. Touch the FRAMEEDIT button to set whether or not the frame value can be edited.
FRAME EDIT ON
FRAME EDIT OFF
3Touch a number button to edit a mark. Use the DATA dial to change the time for the selected number.
Press the ENTERbutton to confirm the setting and return to the MARKLISTscreen.
Touch the CLEARbutton to reset the input value.
TIP
You can use a PS/2 keyboard to set these values. Press the Enter key to confirm and press the ESC key to reset the input value.
Renumbering marks
1Touch the RENUMBERbutton on the MARKLISTscreen to open the following confirmation message.
2Press the OKbutton or the DATA dial to renumber the marks.
FRAME EDIT ON
FRAME EDIT OFF
There are three locate modes.
ABS: Input an actual time and locate to it.
+: Input an amount of time to go forward from the current time and locate to the new time.
Input the time using the number buttons. You can also select a number field and use the DATA dial to adjust the time.
Press the LOCATE button to locate to the new time and return to the Home Screen.
Touch the CLEAR button to clear all input values.
TIP
You can use a PS/2 keyboard to set these values. Press the enter key on the PS/2 keyboard to confirm or press the ESC key button to clear all input values.
TASCAM