6 – Internal Settings and Operations

Mixer settings (MIXER SETUP)

Make mixer settings on this screen.

The MIXER SETUP screen has 4 pages: INPUT, DIGITAL SOURCE, SETUP and OUTPUT. Touch the tabs at the bottom of the screen to open the corresponding page.

INPUT page

Make input settings on this page.

CHANNEL buttons

Press a channel button to open the corresponding CHx SETUP screen (“x” is the channel).

INPUT SOURCE

Set the input source for each channel

•• Ana 1-8: 25-pin D-sub analog input (default setting)

•• Ana A-B: XLR analog input

•• AES 1-8: 25-pin D-sub AES/EBU input

•• AES A-B: XLR AES/EBU input

•• ADAT 1-8: ADAT input

DIGITAL SOURCE page

Set the digital input sources.

CHANNEL buttons

Press a channel button to open the corresponding CHx SETUP screen (“x” is the channel).

DIGITAL SOURCE

Set the digital input source for each pair of channels.

•• AES x-x (default setting): 25-pin D-sub AES/EBU input

•• AES A-B: XLR AES/EBU input

•• ADAT x-x: ADAT input

Fs CONVERT buttons

Turn the sampling rate converter ON or OFF for each pair of inputs (default setting: all OFF).

SETUP page

Access the channel name editing screen and turn channel links ON and OFF on this page.

CHANNEL buttons

Press a channel button to open the corresponding CHx SETUP screen (“x” is the channel).

CH NAME

Touch these buttons to edit the name of the corresponding channel.

CH Link

Touch these buttons to turn channel links ON and OFF. (Default settings: all OFF)

The following parameters are shared by link channels.

•• 2Mix LVL knob

•• Solo

•• Record arming

•• Input source

•• PAN pot (becomes balance)

•• Input monitor

OUTPUT page

Make settings related to output on this page.

XLR Output Source

Set the source to be output from the ANALOG OUTPUT L/ R and DIGITAL OUTPUT L/R connectors.

L/R button (default value): Stereo mix

TASCAM HS-8 49