4Select the take that you want to erase. Touch the MULTISELECTbutton to enable the selection of multiple takes.

5Touch the MENUbutton to open a pop-up menu.

6Touch the DELETEbutton in the pop-up menu.

7Touch the OKbutton or press the DATA dial when a confirmation pop-up message appears.

During erasure, a progress status pop-up appears. When erasure completes, the pop-up disappears.

Changing the start time of a take

1Press the PROJECT key to open the PROJECT screen.

2Touch the “®” button for the project that contains the take for which you want to edit the start time to open the folder selection screen.

3Touch the “®” button for the folder that contains the take that you want to edit to open the take selection screen.

4Select the take that you want to edit.

5Touch the “MENU” button on the “PROJECT” screen to show the pull-up menu.

6Touch the “EDITTC” button in the pull-up menu to open the “EDITTAKET/C” screen.

5 – Projects

7On the “EDIT TAKE T/C” screen, and use the “FRAME EDIT” button to set whether or not to input the frame value.

Frame edit on

Frame edit off

8Use the number buttons to input the take start time.

•• If you begin input without selecting the digit, input will start from the smallest one.

•• To input a specific digit, touch it and make its background yellow, then use the number buttons or the DATA dial to enter two digits at a time.

•• Touch the “CLEAR” button to erase all entered values.

9Touch the “ENTER” button to confirm the setting.

 

TIP

 

••

This can also be edited using a PS/2 keyboard.

••

Press the PS/2 keyboard ESC key to erase all the values.

10When the confirmation pop-up window appears, touch the “OK” button or press the DATA dial.

Using “@” with take names

Select a take and touch the “CIRCLE@TAKE” button to add “@” to the take name or remove it if it has been added previously.

TASCAM HS-8 41