15
On both the DM-3200 and DM-4800, the IF-FW/DM MKII
presents a detailed setup and status display screen as shown below.
Navigate to the Digital page (LCD access button 2 with blue ALT
LED lit), and then select the SLOT tab (labeled SLOT 1-2 or
SLOT 3-4 on the DM-4800)
Cursor Navigation:
Use the 4 arrow keys to the right of
the LCD screen to move the cursor
over to the FW MKII Card area. It will
always be on the left because it only
works in Slot 1 (and also Slot 3 for
the DM-4800).
Use the ENTER key to make changes.
The JOG/DATA dial can also be used
to move the cursor up/down.
This display has the following:
• CARD Status: This shows whether the IF-FW/ MKII card
itself is working correctly.
• 1394 Status: This shows what state the FireWire bus is in.
• Input configuration: Selects the number of channels from
the computer to the mixer.
• Output configuration: Selects the number of channels
from the mixer to the computer.
• Version Information: This tells you what version of the
IF-FW/DM MKII software is currently being used.