Tascam IF-DM System Requirements, Macintosh, Windows, DM-24 not supported, DM-3200 Requirements

System Requirements

Macintosh

•OS: Mac OS X 10.4.4 or higher

•Computer: Apple Macintosh series with on-board FireWire

•PowerPC G4 1GHz or greater, or any Intel Mac.

•Memory(RAM): 512MB or more

•Higher spec required for 32 channel operation at 96 kHz. – see System clocking section in this manual.

Windows

•OS: Microsoft® Windows® XP Home Edition or XP Professional with Service Pack 2

•Computer: Windows® XP Compatible PC equipped with an IEEE 1394/FireWire Port

•Pentium®, Celeron®, or Pentium® compatible processor 1.6GHz or higher

•Higher spec required for 32 channel operation at 96 kHz. – see System clocking section in this manual.

•Memory(RAM): 512MB or more

DM-24 (not supported)

The IF-FW/DM MKII is not supported in the DM-24. The previous generation IF-FW/DM is required instead, which provides 24x24 channels at 44.1 kHz and 48 kHz sampling rates.

DM-3200 Requirements

The DM-3200 must be running software V1.30 or higher to use the IF-FW/DM MKII. A TFI update file for use with TMCompanion is provided on the IF-FW/DM MKII CD ROM. You will need to have TMCompanion installed; this can be found on the CD ROM that came with your DM-3200. You should always check the TASCAM website at www.tascam.com to obtain the latest available versions. Previous versions of the DM-3200 software will not recognize the IF-FW/DM MKII.

6