The IF-FW/DM MKII Control Panel

Windows

The IF-FW/DM MKII Control Panel is found here: Start Menu Æ All Programs Æ TASCAM Æ IFFWDMmkII Æ IFFWDMmkII Control Panel, and it may also be displayed by calling up the ASIO control panel from within a DAW application.

(Note) The IF-FW/DM MKII installer does not put an icon for the Control panel in the Windows System Control Panel.

On the left side are the Status and Configuration panels; on the right is the Settings panel.

Status Panel

The Status panel shows the following information:

Status – This is the Firewire status, Not Ready, Locked or Unlocked. If the FireWire cable is not connected, or the mixer is not ON, then the Status panel shows “No Device Found” here, and the rest of this panel, the Configuration panel and the Settings panel will be blank

Sample Rate – The Sampling Frequency that the mixer is currently running at.

29

Page 29
Image 29
Tascam IF-DM owner manual IF-FW/DM Mkii Control Panel, Windows, Status Panel