33
Mac The IF-FW/DM MKII Control Panel is found under the
Applications folder. Double click to launch it.
It can also be reached through the Audio MIDI Setup utility by
pressing the “Configure Device” button when the IF-FW/DM MKII
is selected in the “Properties For:” pull-down.
On the Left hand side is the Status panel, and on the Right hand
side is the Configuration panel.
Status Panel
The following information is shown:
• Status – This is the Firewire status, Not Ready, Locked or
Unlocked. If the FireWire cable is not connected, or the
mixer is not ON, then the Status panel shows “No Device
Found” here, and the rest of this panel and the
Configuration panel will be blank
• Sample Rate – The Sampling Frequency that the mixer is
currently running at.
• Channel count – How many channels are currently being
streamed to and from the mixer. This can be changed only
from the mixer’s LCD screen. (Note): The numbers here
are relative to the computer. If the Status is Unlocked,
additional information is displayed here about the state of