(Note) Sonar 6 allows you to rename each channel’s identification string that is otherwise provided by the IF- FW/DM MKII driver.

(Note) If the sample rate of the mixer does not match Sonar’s setting for “Default Settings for New Projects” when Sonar is launched, Sonar will put up a warning dialog, and change its own default setting.

(Note) You will be able to load a project with a sample rate that does not match the current mixer’s sample rate, but you will not be able to play it back. Sonar will put up an error message. Please quit Sonar, change the mixer’s sample rate and re-launch Sonar.

Logic Pro

The following instructions are for Logic Pro 7.2

1.Launch the Audio preferences window from either:

Logic Pro menu Æ Preferences Æ Audio… or

Audio menu Æ Audio Hardware and Drivers…

2.Click on the “Drivers” Tab

3.Ensure that the Enabled tick box under Core Audio is selected.

4.Turn on the “24 Bit Recording” tick box.

5.Select “IF-FW/DM mkII” in the Driver pull-down.

6.If there is no IF-FW/DM MKII entry in the list, it is not being detected by your Mac, go to the troubleshooting section.

7.A dialog with “Please reboot Logic Pro to launch CoreAudio” will appear.

8.Click “Try (Re)Launch”

9.Set “Max. Number of Audio Tracks” to 32 or greater if you want to use the full capability of the IF-FW/DM MKII, or less if your Mac is not powerful enough.

10.Configure the I/O Buffer size according to your Mac’s capabilities. Generally, less powerful Macs will require higher settings.

22

Page 22
Image 22
Tascam IF-DM, IF-FW owner manual Logic Pro