Tascam IF-DM, IF-FW Configuring the Computer

9
• Please note that the IF-FW/DM MKII must be connected by
itself on a FireWire bus. More than one FireWire
connector on a computer does not mean each connector has
its own bus. More often, all connectors go to the same bus
on the computer. If you require additional FireWire
devices, it is necessary to add a FireWire card, thus adding
a separate bus, for those devices.
Configuring the Computer
Macintosh
TASCAM driver software is required in order for Mac OSX to
recognize the IF-FW/DM MKII. On the CD-ROM that came with
your card there is an installer disk image. Double click this to
mount and open the contents.
Double click on IFFWDMmkII_Installer.pkg