Assembling the basket:
-Remove the basket and attach the handle by pivoting until the rods engage in the housing (Fig.2).
Instructions for use
Before use:
-Make sure that all the product’s packaging has been removed.
-Before using the product for the first time, clean the parts that will come into contact with food in the manner described in the cleaning section.
Oil filling:
-Open the cover
-Ensure that the electrical equipment is appropriately positioned.
-Pour oil up to the mark indicating the MAXIMUM level on the bowl (Fig.1).
-The appliance must not be used with less oil than that indicated by the MINIMAL mark.
Use:
-Unroll the cable completely before plugging it in.
-Connect the appliance to the mains.
-Turn the appliance on using thermostat adjustment control
-Select the desired frying temperature using the thermostat control. The heating indicator light will turn red, indicating that the oil is being heated (close the lid to save energy).
-Prepare the food to be fried and place it in the basket, making sure that it does not rise above ¾ of its capacity. Allow the food to drain before placing it in the basket.
-Frozen food must be allowed for thaw
beforehand. The placing of frozen food or food with high water content in the basket may cause the oil to suddenly spit after a few seconds.
-Wait until the heating indicator light has gone out which will indicate that the appliance has reached an adequate temperature.
-During the appliance’s use the heating indicator light will come on and off automatically, indicating the heating elements are working, and therefore maintaining the desired temperature.
-Slowly place the basket in the bowl to avoid overflowing and splashing. Fry with the lid open or closed, as required.
-When the food has been fried sufficiently, lift the basket and position it in the support in order to allow the excess oil to drain from the food (Fig. 3)
-Empty the basket.
-Change the oil approximately every 15 or 20 frying operations, or every 5 – 6 months if not used frequently.
Once you have finished using the appliance:
-Select the minimum position (MIN) using the thermostat control.
-Unplug the appliance from the mains.
-Close the lid.
-Clean the appliance.
Practical recommendations:
-Fry a few pieces of bread to remove the smell of used oil.
-For food with a high water content, it is better and quicker to fry in two lots with less food than in just one. This will reduce the risk of splashes and spillage.
-The
Professional 1 | 14 | 31/12/2009 | 12:49:50 |
