15
Model C300 NP Important: To the Operator
Press the AUTO (- ->) key to move t o the next
screen. The next screen will indicate when the fault
was satisfied.
FAULT HISTORY 2
10/25/06 14:06:19
RESTORED FROM FAULT
PAGE 2 ++ + -- - SEL
Press the MENU(SEL) key to return to the
OPERATOR MENU.
Screen H is RINSE/SANITIZE. This screen allows
the operator to rinse or sanitize the freezing
cylinder(s).
RINSE / SANITIZE
RINSE SANITIZE EXIT
---
<- - --> SEL
Use the AUTO (- ->) and OFF (<- -) keys to select
either RINSE or SANITIZE, and then pres s the
MENU (SEL) key.
SANITIZE
LEFT SIDE YES NO
---
<- - --> SEL
Use the cursor keys to select YES or NO, then
press the MENU (SEL) key.
SANITIZE
RIGHT SIDE YES NO
---
<- - --> SEL
Repeat for the right side of the unit.
Screen I is SERVICE MENU. This screen allows
the authorized service technician to access service
information. Press the MENU (SEL) key to return to
the OPERATOR MENU.
OPERATOR MENU
ABCDEFGHI
SERVICE MENU
<- - --> SEL
Syrup Out Indicator
AUTO MODE AUTO
OUT SYRUP OK
CO2-OK WATER-OK
If the word “OUT” appears in one of the columns
next to the word “SYRUP”, it indicates a lack of
syrup or syrup pressure being supplied for the
indicated freezing cylinder. If the unit is in the AUT O
or PRIME modes, the PRODUCT NOT READY light
will illuminate and a warning tone will sound for that
freezing cylinder. At this time, replace the
appropriate bag-in-the-box. As a safety feat ure, the
refrigeration system automatically stopst o preventa
freeze-up in the freezing cylinder.
If a syrup out condition occurs on one side, that s ide
will enter the HOLD mode at which time the
refrigeration remains off and the beater continues t o
run. The opposite side will not be affected. When t he
syrup is satisfied, the unit will refill the product tank,
and then automatically return to the AUTO mode.