TC electronic SDN BHD SDN BHD I/O Setup, MIDI CC Range On/Off, Program bank, Bulk Dump, SysEx ID

I/O SETUP

MIDI CC Range: On/Off.

Determines whether the TRIPLE•C should respond to MIDI Continuous Controllers or not. On page 29 you will find a list of the TRIPLE•C Continuous Controllers.

Program bank

Determines which bank an external MIDI device will address in the TRIPLE•C when sending a program change. The options are: Factory, User or External.

When External is selected controller #32 can be used to address either the Factory or the User bank.

Factory bank:	Controller #32=0
User bank:	Controller #32=1

Bulk Dump

Press ENTER to perform a total Bulk dump of all presets to an external MIDI device such as a MIDI sequencer.

The TRIPLE•C is always ready to receive MIDI Bulk dump information.

SysEx ID

Determines the Sys-Ex ID number of the unit. All effects parameters; algo changes and routings can be changed through MIDI Sys-Ex via an external MIDI device. In order to define which unit the sent MIDI Sys-Ex information should reach, the appropriate ID number must be set.

Link Range:On/Off

Will link parameters between two Single Channel units when connected and used either in a Stereo Setup or in a Dual Mono setup.

Please see page 22 for further explanation.

View Angle

Adjusts the LCD display backlight for better viewing comfort.

14