TC electronic SDN BHD SDN BHD user manual Front Panel, LOOK AHEAD key

FRONT PANEL

LOOK AHEAD key

When in Multi-band mode the Look Ahead delay (3ms) can be activated allowing even more pre- cise processing.

THRESHOLD knob Multi-band mode: Sets the Mid band Threshold value. The Lo/Hi bands are slaved accordingly. Full-range mode: Sets the Threshold value.

Envelope mode: Sets the Threshold of the Envelope.

RATIO knob

Multi-band mode: Sets the Mid band Ratio value. The Lo/Hi bands are slaved accordingly. Full-range mode: Sets the compression Ratio.

Envelope mode: No function.

ATTACK knob

Multi-band mode: Sets the Mid band Attack value. The Lo/Hi bands are slaved accordingly. Full-range mode: Sets the Attack time.

Envelope mode: Sets the Attack time of the gain added to the start-up of the source.

RELEASE knob Multi-band mode: Sets the Mid band Release time. The Lo/Hi bands are slaved accordingly. Full-range mode: Sets the Release time.

Envelope mode: Sets the Release time of the gain added to the ring-out of the source.

ENVELOPE MODE key

Activates/deactivates the

Envelope mode.

LO-BAND knob

Multi-band mode:

Adjusts the Output level of the processed Lo-Frequency band. Full-range mode: No function Envelope mode: Attack Gain.

HI-BAND knob

Multi-band mode:

Adjusts the Output level of the processed Hi-Frequency band. Full-range mode: No function Envelope mode: Release Gain.

BYPASS key

Bypasses all processing parameters but not the System settings found in the I/O menu. When the key LED is lit the TRIPLE•C is bypassed.

LEVEL knob

Sets the overall Make Up gain through the TRIPLE•C. This is used to compensate for gain loss in the Compressor. The absolute gain through the TRIPLE•C is displayed in the LCD by the fixed LED in the gain meter. Range: +/- 18dB.

MENU key

Push MENU and use the VALUE SET wheel to select menu.

PARAMETER wheel

Scrolls between parameters.

VALUE SET/ENTER wheel Is used to change values. When pushed, actions such as Recall, Store etc. are approved.

7