RECALL - EDIT - STORE
Presets in general
The TRIPLE•C holds 50 factory presets (ROM bank) and you are able store 100 additional user presets in the RAM bank. When scrolling through the presets you will locate the user presets after the 50 factory presets.
Recall
To recall a preset:
•Press MENU.
•Dial the VALUE SET wheel until the display reads “Recall”.
•Press ENTER.
•Use any wheel to scroll through the 50 Factory and 100 User presets. Until you have actually recalled a preset you are previewing. While previewing the preset name and number is blinking.
•Press ENTER to recall a preset.
The TRIPLE•C prompts "Recalled" for approximately one second and returns
Edit
To edit preset parameters:
•Press MENU.
•Select “Edit Menu” using the VALUE SET wheel.
•Press ENTER.
•Select parameter using the PARAMETER wheel and change values using the VALUE wheel.
Store
To store a preset with the same name:
•Press MENU.
•Turn the VALUE SET wheel until the display reads “Store”.
•Press ENTER.
•The TRIPLE•C suggests the first available RAM space as storing location but you can select any of the 100 locations using the VALUE SET wheel.
•Press ENTER twice to store.
To rename a preset while storing:
•Press MENU.
•Dial the VALUE SET wheel to until the display reads “Store”.
•Press ENTER.
•Select storing space using the VALUE SET wheel.
•For altering the preset name; use the PARAMETER wheel to move cursor and the VALUE SET wheel to select character.
•Press ENTER twice to store the preset with the new name.
15
