83
-
515
-
000
Rev.
B

3

SAFETY INSTRUCTIONS

ENVIRONM

The Genesys
TM
power supply series safety approval applies to the following operating cond
i
tions:
*Indoor use
*Ambient temperature: 0°C to 50°C
*Maximum relative humidity: 90% (no condensation)
*Altitude: up to 3000m
*Pollution degree 2
Do not use this product in environments with strong Electromagnetic field, corrosive
gas and conductive materials.
CAUTION Risk of Electrical Shock
On (Supply)
Instruction manual symbol. The instr
u
ment
will be mark
ed with this symbol when it is
necessary for the user to refer to the i
n-
struction manual.
-
-
-
Direct Current (DC)
Indicates hazardous voltage.
Alternating
Current (AC)
Indicates ground terminal.
Three
-
Phase Alternatin
g Cu
r
rent
Protective Ground Conductor Terminal
Standby (Supply)
Off (Supply)
The WARNING sign denotes a hazard. An attention to a procedure is called.
Not fo
l
lowing procedure correctly could re
sult in personal injury.
A WARNING sign should not be skipped and all indicated conditions must be
fully understood and met.
The CAUTION sign denotes a hazard. An attention to a procedure is called. Not follo
w-
ing
the
pr
ocedure correctly could result in damage to the equipment. Do not proceed
b
e
yond a CAUTION sign until all indicated conditions are fully understood and met.
FCC COMPLIANCE NOTICE:
Note: This equipment has been tested and found to comply with the limits f
or a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pr
o-
vide reasonable protection against harmful interference when the equipment is ope
r-
ated in a commercial environment. This equipment generates electro
-
magnetic
fields,
and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful i
nterference
in which case the user will be required to correct the interference at his own expense.
3
~