DVD VCD
Settings for DVD playback (introduction)This chapter describes how to use the SETUP menu. Most settings and adjustments are required to be set when you first use the system.
Using the SETUP menu, you can adjust the picture size, set a preferred language for audio and the OSD (on screen displays), limit playback by children, et cetera.
1Turn on the main unit, and the television (monitor).
2Press the SETUP button.
The setup menu appears on the screen.
<Exit the setup mode by pressing SETUP once again.
<Although it is possible to enter the setup menu while playback is continuing (or in resume mode), not all menu functions will be available. Expand the number of available functions by pressing the STOP button twice.
4Enter the menu item with the right cursor button.
5Use the up and down cursor buttons to select the options within the menu item, and ENTER to confirm the entry.
Individual menu functions are described on pages 33 through 37.
Repeat steps 3 through 5 as required.
6Exit the setup mode by pressing SETUP once more.
3Use the cursor buttons to navigate the menus.
If no cursor is visible on the screen, use the left and right buttons to select a page.
Use the up and down buttons to highlight menu items within the selected page.
Press the left button to return to the upper menu.
32