
1.Select FM or AM using the FUNCTION button (or the TUNER button of the remote control unit).
2. Select the station you want to listen to (auto selection).
Hold down the TUNING button (+ or
“SEARCH . . .” appears on the display, and the unit starts searching for a station.
When a station is tuned in, the tuning process will stop automatically.
Repeat this step until the station you want to listen to is found.
<If you want to stop the tuning process, press the TUNING button.
Selecting stations which cannot be tuned automatically (manual selection)
When the TUNING button is pressed momentarily, the frequency changes by a fixed step.
Press the TUNING button repeatedly until the station you want to listen to is found.
Pressing this button alternates between Stereo mode and Mono mode.
STEREO
FM stereo broadcasts are received in stereo and the “ST.” indicator lights in the display.
<If the sound is distorted and the “ST.” indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode.
MONO
To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise.
If the reception is poorFor the best reception, rotate the FM or the AM antenna until you get stations clearly.
38