Cannot listen to any station, or signal is too weak. eTune in the station properly.
eRotate the FM or AM antenna for the best reception position.
Though the broadcast is stereo, it sounds monaural. ePress the STEREO/MONO button.
If normal operation cannot be obtained, unplug the power cord from the outlet and plug it again. This resets the internal
If unplugging the power cord does not solve the proble, try the following procedure to reset the internal
1.Turn the unit on.
2.Press the STOP button while holding down the PLAY/PAUSE button.
3.Release the STOP button when
4.Release the PLAY/PAUSE button.
5.Press the STOP button.
When the unit (or a disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, leave the unit turned on for one or two hours. Then the unit will stabilize at the temperature of its surroundings.
MaintenanceIf the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit.
ENGLISH
45