CAnalog audio input and output jacks (AUX1 IN/LINE OUT)

These input and output analog audio signals.

Use commercially available audio cables to connect other equipment to the input and output jacks of this unit.

White (L)

White (L)

Red (R)

Red (R)

ooTo connect and use a cassette deck, CD recorder or other recording device, connect that device’s output jacks to this unit’s AUX 1 IN jacks, and that device’s input jacks to this unit’s LINE OUT jacks.

ooInsert the plugs completely. Do not bundle these cords with power cords or speaker cables. Doing so could reduce the audio quality or cause noise.

There are analog audio input jacks on both the front and rear panels.

If cables are connected to both the front panel (AUX 2 IN) and the rear panel (AUX 1 IN) jacks, the audio input through the front panel jack (AUX 2 IN) will be used. If nothing is connected to the front panel jack (AUX 2 IN), the audio input through the rear panel jack (AUX 1 IN) will be used.

DAC power cord

Confirm that the power plug is plugged into a working outlet.

VV Be sure to connect the power cord to an

AC outlet that supplies the correct voltage. Connection to an outlet that supplies incorrect voltage could cause fire or electric shock. Hold the power plug when plugging it into an outlet or unplugging it. Never pull or yank on the power cord. Unplug the power cord from the outlet when you are not planning to use the unit for an extended period of time.

ENGLISH

15