Teac LP-P1000, Turntable Audio System Setting the clock (2), Current time display, Display example, 6Press the CLOCK ADJUST button, 8Press the CLOCK ADJUST button

Setting the clock (2)

6Press the CLOCK ADJUST button.

Display example

The minute value blinks.

7Press the TIME (j/k) buttons to set the current minute.

8Press the CLOCK ADJUST button.

This completes the procedures for setting the time.

The clock will start from the set minute at 0 seconds.

ooThe unit’s clock and wakeup timer settings will be erased if a power outage occurs or the power cord is unplugged from an outlet.

Current time display

The clock is always shown when the unit is in standby mode (off ) and when the function is set to PHONO/ AUX.

Press the remote control's DISPLAY button to show the clock on the display.

ooThe current time is shown for three seconds in CD and FM/AM modes.

Display example

Current time

ooThe DISPLAY button does not function in AUX/ PHONO and Bluetooth modes.

ooIn Bluetooth mode, the current time is only shown when paired.

26